This is the Great Planes AT-6 Texan .40 Size ARF Sport Scale Airplane Kit.
This Legendary Warbirds Custom-Wood Series ARF is Covered in Top Flite MonoKote
      Recommended For Modelers Who Have Had Trainer Plane Experience and
                Also Have Safely Flown .40 Size Low Wing Planes.

FEATURES: Rivals Scratch-Built Kits For Quality From The Mostly Wood Framework
            To The Expertly Applied, Multi-Colored Top Flite MonoKote Covering.
          Large Radio Compartment Lets You Reposition The Servo Tray To Find
            The Precise Center Of Gravity For 2-Stroke or 4-Stroke Engines.
          Pre-Painted, Fiberglass-Reinforced, ABS Cowl For Scale Appearance.
          Includes Standard Fixed Wire Landing Gear-With Wheel Wells and
            Mounting Rails Are Already In Place For Optional Hobbico Mechanical
            Retracts. (See COMMENTS)
          Dual Aileron Servos Add Precision and Authority For Crisp, Impressive
            Maneuvers.  Simplicity of the Linkage Also Makes Set-Up A Snap.
          Elevator Halves Function Independently Using Dual Yokes and Each Are
            Adjustable.  "Straight" Linkage Set-Up Avoids Twisting or Bending
            of the Pushrod for Maximum Control Surface Accuracy and Authority.
          Can Be Flight Ready In Only 16-20 Hours.
          Great 2nd or 3rd Kit If You Can Safely Handle A 40-Size Low-Wing.

INCLUDES: Clear Canopy, Decal Sheet, Hardware Package, Pushrods, CA Hinges,
            Control Horns, Tailwheel Bracket, Pre-Formed Wire Landing Gear,
            Pre-Painted ABS Cowling, Nylon Adjustable Engine Mount,
            Left & Right Wing Panels, Fuselage, Tail Sections,
            Wheels, Tailwheel, Wood Servo Trays and Wing Joiners, Fuel Tank,
            and Photo-Illustrated Instructions.

REQUIRES: Engine:  .40-.51 (2-stroke) or .48-.80 (4-stroke)       (per RTJ 6/1)
          Muffler: Sports-Style (Engine Mounts In Upright Postition)
          Radio:   4-6 Channel Radio  (5th ch for optional retracts)
          Servos:  5-6 Standard (2-Aileron, 1-Elevator, 1-Throttle, 1-Rudder)
            (a high torque servo is suggested for the rudder, but not required)
          Servo Extension 6": 1
          Y-Harness: 1 (For Aileron Servos)
          Misc. Items: Glow Plug, Domed Prop Nut, 1/4" Foam Rubber Padding,
            Medium Fuel Tubing, Fuel Filter, Propeller, Building and Field
            Equipment.

SPECS:    Airfoil:      Semi-Symmetrical Low-Wing
          Wingspan:     59.75" (1517mm)
          Wing Area:    557.6 sq in (36 sq dm)
          Wing Loading: 23.1 oz/sq ft (70.1 g/sq dm)  Washout: 2 degrees
          Weight:       5.6 - 6.3 lb (2.5-2.85 kg)
          Length:       42.14" (1073mm)
          Center of Gravity: 3-15/16" (100mm) Back from the wing's leading edge
            where the rounded wheel well meets the main part of the wing.
          Control Throws:           Low Rate       High Rate
            Ailerons: Up & Down   7/16" (11mm)   11/16" (17mm)
            Elevator: Up & Down    1/4" (6mm)      1/2" (13mm)
            Rudder: Right & Left   5/8" (16mm)   1-1/8" (28mm)

COMMENTS: None Of The Hardware Used In The Retract Installation Is Included In
            The Kit.  All Hardware Must Be Purchased Separately.  Retract
            Installation Is ONLY Recommended For Experienced Modelers.
          The Covering Used On This AT-6 Texan Are Top Flite Missle Red,
            Aluminum and Yellow.
          The Paint On the Cowl is Top Flite Missle Red.
          Pilots Shown Inside The Plane Are Not Included.
          Warranty on Great Planes Airplanes is 90-Days.
                                                                    JAL 3/22/99
                                                                          ir/jl