This is the Great Planes CAP 232 Aerobatic .40 Size Sport/Scale Kit.
 This Aircraft is Not Only Legal for IMAC (scale aerobatic) MinIMAC (.40 sized
 aerobatic) Competition, it is Capable of This Competition at its Highest Level
       UNLIMITED, and is designed specifically for UNLIMITED freestyle!
              This Kit is the the Intermediate Builder and Flier.
     Its Gentle Handling Characteristics Make It A GREAT 2nd Low Wing Model.

FEATURES: Dual Elevator Pushrods.
          Constructed of Balsa and Plywood, with the Entire Fuselage
            Consisting of Interlocking, Die-Cut Parts.
          Fully Symmetrical Wing has Die-Cut Ribs with Jig Tabs on them to
            Easily and Accurately Build in the Correct Dihedral and Taper
          Removable Tank and Battery Mount for Easy Access/Weight Adjustment
          Rudder Servo Rear Mounted (outside of Fuselage)- for Short, Tight
            Linkage
          Scale (HUGE) Rudder and Elevators for Optimum Aerobatic Performance.
          Fuselage Builds Upside Down and Stays Pinned Through Wing Mounting!
          Balsa Sheeting Replaces Most Carve/Sand Parts.
INCLUDES: Clear Canopy, Adjustable Engine Mount, Hardware (pushrods, CA hinges,
            control horns, tailwheel bracket, misc. nuts and bolts), decals,
            Full Size Rolled Plans, Photo-Illustrated Instructions, All Wood,
            Dural Landing Gear, Cowl, and Wheel Pants.

REQUIRES: Engine: .40-.46 (2-stroke) or .52-.70 (4-stroke)
          (Optional: Pitts-Style Muffler for 2-stroke applications)
          Radio:  4 Channel w/ 4 Servos
          Servo Extension: One 24" (for rudder)
          Covering: Two to Three 6 Foot Rolls with Matching Paint
          Misc. Items: Fuel Tubing, Fuel Filter, 10 oz Fuel Tank,
            2-1/2" Main Wheels, 1" Tailwheel, 2-1/4" Spinner,
            Building and Starting Equipment.

SPECS:    Wingspan: 58"                         CG: 3-3/4" aft of LE @ fuse
          Wing Area: 594 sq in                  Throws: hi low (each direction)
          Wing Loading: 18-20 oz per sq ft      Elev   1"  5/8"
          Weight: 4.75-5.25 lb.               Rud: 3"     1-3/4"
          Length:  52"                        Ail: 3/8"   1/4"
          Thrust angles: 2 degrees right, 2 degrees UP! (Yes, up is correct)
          Incidences: wing and stab at 0 with engine at 2 degrees POSITIVE.

COMMENTS: The difference between a good & a great aerobatic performer is its
            slow speed handling and ease and predictability in flight.  This
            kit is truly a GREAT performer -- it can be a newer modelers second
            low wing aircraft, or a seasoned competitor's competition airplane.
          FLIGHT PROVEN DIHEDRAL SHOULD NOT BE MODIFIED.
          The designer sent an additional note with the kit specifically to
            to explain "The designer wishes to assure you that the specified
            dihedral is correct. Although somewhat out-of-scale, this dihedral
            angle is required to eliminate roll ocupling, thus providing you
            with a more neutral airplane.
          CG should be placed at 3-3/4" behind leading edge of wing, as
            indicated in the text in the manual. Mark on original plans
            was incorrect.
          DECALS: CAP4D01-1 per kit, only available from GPM
            CAP4D01-(3) 11" L X 2 3/4" H black, white and red CAP 232 logos
                    (1) 15" L X 3" H black, white and red GREAT PLANES logo
                    (1) instrument panel
                    (10) 1" red and white stars
                    (6) 1" black and white stars
                    (2) 2" black, white and red GREAT PLANES AEROBATIC
                           TEAM logos.
          Pilot figure in pictures on box are not included.

                                                                     3/28/98amc
                                                                       8/4/98dh
                                                                          ir/jl