Designed for the Beginner, this is a Dura-Plane Trainer 20 Airplane Kit.

FEATURES: Super Strong PVC Fuselage with an Aluminum Main Channel.
          Aluminum Spar Inside a Foam Wing.
          Balsa Tail Assembly.
          Flight Ready in Approximately 6 to 10 Hours.                        .

INCLUDES: One Foam Wing w/Aluminum Spar, PVC Fuselage, Aluminum Fuselage
            Channel, All Wood To Build The Tail Assembly, Pushrods, Nylon
            Adjustable Engine Mount, Wood Parts Bag, Pre-Bent Aluminum Main
            Landing Gear, Hardware Package and Plastic Center Wing Shield.

REQUIRES: Engine: .25-.40 (2-stroke)
          Radio:  4 Channel w/3 Servos (4th Servo, Optional Ailerons - COMMENT)
          Strapping Tape for the Wing
          Covering: One 6 Foot Roll of EconoKote or Low Temperature Covering
          Misc. Items:  One 4oz. Fuel Tank and Fuel Tubing, One 1/4-28 Aluminum
             Safety Spinner, Wheel Collars, Foam Rubber, Rubber Bands,
           and Assorted Building and Field Equipment.

SPECS:    Wingspan: 43.25"      CG: 3" aft of LE measured on bottom of wing
          Wing Area: 390 sq in
          Weight: 4.4 lb
          Fuselage Length: 38"
          Airfoil: Flat-Bottom, High Wing
          Wing Loading: 26 oz/sq ft

COMMENTS: This kit Does Not Have Ailerons.
          Kit has only the main landing gear, no nose or tailwheel        ir/jl
          CONTROL THROWS:
                         ELEVATOR- 3/4" EACH WAY
                         RUDDER- 1/2" EACH WAY