This is the S-280 7.2-8.4 Volt Ferrite, Ball Bearing Motor from Great Planes.
              Designed for use with the Park Flyer airplanes or
              other models that require a speed 280 size motor.

FEATURES: Ball bearings.
          Single-wind armature.
          Solid can.
          Fixed timing.
          Factory-installed capacitors.
          Factory-installed 2-pin female connector. Designed to plug into the
            C-5 or C-10 Great Planes speed controls.

INCLUDES: One S-280 ferrite motor with lead, 2-pin female connector and
            two pre-installed capacitors.

REQUIRES: Park Flyer aircraft
          Electronic speed control (GPMM2010 micro recommended)
          For a gearbox, use GPMG0200 to GPMG0214 depending on the gear ratio.
          Fine-point felt-tip pen for marking motor placement into a gearbox.

SPECS:    Length: (not including shaft) 1.61" (41mm)
          Length: (including motor shaft) 1.93" (49mm)
          Diameter of Motor Can: 0.94" (24mm)
          Diameter of shaft: 0.078"

COMMENTS: Motor does not have replaceable brushes, fan or coreless design.
          Does not include any instructions.
                                                                     JAL 6/4/01
                                                                          ir/kh