This is a Magnetic Building Board System from Great Planes.
    This is Used to Build Wings or Fuselages With Magnets Instead of T-Pins.

FEATURES: Flat, Metal Building Board with 1/4" Perpendicular Grid Lines
            Running the Full Length and Width of the Board.
          Uses Magnets Attached to Rigid Plastic Hold-Downs for Securing
            Fuselage, Tail Stabilizers or Wing Wood Pieces While Building.
          Holds Formers, Stringers, Ribs, Spars, Leading and Trailing Edges
            at Flat and/or Exact Heights or Perpendicular While Building.
          Allows Trial Assembly to Check Parts Fit and Alignment Without Glue.
          Big 16"x48" Metal Board Can Accommodate Planes of Virtually Any Size.

INCLUDES: 80 - Steel Plates for Attaching To The Magnets
          40 - Magnets
          40 - 8-32 x 1" Machine Head Screws
          40 - Hex Nuts
          10 - Ribholders (Blue Plastic)
          10 - 5" Stands
          10 - Vertical Presses
          10 - Stairs
          10 - 10-24 x 4" Carriage Bolts
           1 - Magnet Mover
           1 - 10" of Vinyl Tubing
          10 - 2-56 x 6/16 Screws
          10 - 4-40 x 1/4 Screws
           1 - 16" x 48" Metal Building Board with 1/4" Grid Lines
           1 - Instruction Book
           1 - Box

REQUIRES: CA (Cyanoacrylate) Glue for Attaching the Plates to the Magnets.

COMMENTS: Hold-downs, which are useful for securing 1/4" and 3/16" sticks, are
            not included.  These are GPMR7004.
                                                                    jak 7/16/98
                                                                          ir/jl