This is a Radio Controlled, Kyosho Sea Dolphin 770 Racing Yacht Sailboat.

     Designed by a former R/C yacht racing champion, the Sea Dolphin 770
     incorporates super upgrades.  This stylish craft has a unique design,
     along with a compact size that belies its exceptional sailing prowess.

FEATURES: The Sea Dolphin 770's profile is patterned after the full-size yachts
            compete in around-the-world sailboat races.
          The mast, deepwater rudder and pre-ballasted bulb keel can be
            installed in minutes making transportation to the lake easy.
          One-piece injection molded gleaming white ABS plastic hull
            with bow cover.
          Authentic details such as the helm and pulpit hardware.
          Sealed radio compartment is completely waterproof.
          Anodized aluminum mast and boom.
          The booms of the jib and main sail are connected to the mast with
            rings, which keeps them aligned in the optimum position for any
            sailing condition.
          Sails are made of strong and pliant spun cloth, with reinforced
            corners that prevent wrinkles during full sail.
          The lightweight mast extends to the bottom of the hull, and has two
            spreaders for more strength, and a lower center of gravity that
            combats heeling of the boat during hard turns or shifts in wind
            direction and/or speed.
          Painting the lead Ballast (see COMMENTS)

INCLUDES: ABS plastic hull with bow cover
          Helm and pulpit hardware
          Unassembled wooden stand
          Lead ballast (unpainted)
          Hull, sail decals and boat decals
          Two-piece alumunum mast
          Illustrated instructions

REQUIRES: Radio: 2-Channel Stick (on surface frequency) with mounting hardware
             and one standard servo (see COMMENTS)
          Sail Servo: Futaba S3802 is recommended
          Radio Batteries: (12) AA size batteries
          Receiver battery box
          Building equipment like (CA and epoxy glue, hobby knife, sandpaper)
          Paint for painting the lead ballast.
          Box wrench, hex wrench, phillips head screwdriver
          Hull may be painted with epoxy or polyurethane (but is not required)

SPECS:    Length:        30.3" (770mm)
          Width:          6.5" (165mm)
          Height:          52" (1320mm)(from bottom of ballast to top of mast)
          Height:       42.25" (1072mm)(from top of hull to top of mast)
          Sail Area: 363.5 sq in (23.45 sq dm)
          Total Weight: 4.3 lb (1950g)(approx.)

COMMENTS: There is NO VINYL COVER for the ballast included in this kit as it is
            with the Kyosho Seawind Kit.
          The radio chosen to go with this sailboat must have mounting
            hardware for the servos.  Radios like the 2VR from Futaba do not
            come with that hardware.  Please make sure that modeler has this!
            If it is needed, use FUTM3551.
                                                                   jct 12/21/00
                                                                          ir/jl
Replacement Manual