This is the Radio Controlled, Glow Powered, Almost-Ready-to-Fly,
               Great Planes U-Can-Do 3D .60 Aerobatic Airplane.
     Slow flight characteristics suitable for first time low wing pilots.
   Increase control throws to 3D levels for thrilling aerobatic performance.
                 For Intermediate to Advanced Modeler/Flyers.

FEATURES: Construction: Balsa and plywood.
          Wings: One-piece all wood, attaches to fuselage with two 1/4-20 nylon
            wing bolts (included). Fully symmetrical, mid-wing placement.
          Covering: Factory applied Top Flite MonoKote.  Color scheme is white
            with swirls of red, and light and dark blue on the wing and tail
            sections.  Bottom of wing is large red and white checkerboard
            pattern.
          Cowling: Pre-painted white fiberglass-reinforced cowl and wheel
            pants.
          Canopy: Single, clear plastic.
          Landing Gear: 0.12" (3mm) thick pre-formed aluminum.
          Dual Aileron Servos: Standard size with at least 50 oz/in of torque.
          Building Time: Ready to fly in as little as six to eight hours.
          Warranty Period: Great Planes warrants this kit to be free from
            defects in both material and workmanship at the date of purchase.
            This warranty does not cover any component parts damaged by use or
            modification.

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
            pre-bent  0.12" (3mm) main landing gear,  0.08" (2mm) tailwheel
            wire, 3" (76mm) main wheels, 1.25" (31mm) tailwheel, nylon
            adjustable engine mount, 14.2 oz (420cc) fuel tank, 2-1/4" (57mm)
            red spinner, plywood servo trays, hardware package, decals, and
            photo-illustrated instructions.

REQUIRES: Engine: .61 -.91 (10-15cc)  (2-stroke)
              OR  .70 -.91 (11.5-15cc)(4-stroke)
          Muffler: Stock type supplied with engine.  Engine mounts in inverted
            position.
          Radio: Four channel minimum, Six channel computerized radio
            recommended for maximum flexibility and performance.
          Servos: Standard size 2 ball bearing-Aileron, 2 ball bearing-Elevator
            1 high torque-Rudder, 1 standard-Throttle.
          Servo Extensions: Two 6" (152mm) for ailerons and one 24" (610mm) for
            rudder and two 24" for elevator.
          Y-Harness: One, for aileron servos, unless using computer radio.
          Servo reversing y-harness for elevator servos unless using comp radio
          Misc. Items: Glow plug, 1/4" foam rubber padding, medium fuel tubing,
            fuel filter, propeller, building and field equipment.

SPECS:    Wingspan:      65" (1651mm)
          Wing Area:   1024 sq in (66.1 sq dm)
          Weight:         7.75 lb (3.5 kg)
          Wing Loading:  16-17 oz/sq ft (49-52 g/sq dm)
          Length:        68" (1725mm)
          Airfoil: Fully-symmetrical mid-wing
          Center of Gravity: 4-7/8" (124mm) Back from the wing's leading edge
          Control Throws-
            Elevator: Up & Down   3" (75mm)
            Rudder: Right to Left 4" (102mm)
            Ailerons: Up & Down   2-1/8" (55mm)
            Flaperons: Up & Down  2" (50mm) assigned to a switch, not mixed to
              the elevator
          Expo for 3D Rates-no mixing other than expo:
            Elevators: -20%
            Rudder:    -20%
            Ailerons:  -20%

COMMENTS: Williams Brothers make a Racing Pilot Bust that fits nicely under the
            canopy-WBRQ2479.

          The U-Can-Do 3D is covered with the following Monokote colors:
            Jet White (TOPQ0204)               True Red      (TOPQ0227)
            Sky Blue  (TOPQ0206)               Sapphire Blue (TOPQ0226)
            Black     (TOPQ0208
                                                                    JXS 8/16/02
                                                                          ir/kh